Wuxi Komay Electric Equipment Co., Ltd.
Main products:single pole insulated conductor rail,enclosed conductor bar system
Contact Us
  • Contact Person : Mr. Chen Colin
  • Company Name : Wuxi Komay Electric Equipment Co., Ltd.
  • Tel : 86-510-88227833
  • Fax : 86-510-88227834
  • Address : Jiangsu,Wuxi,No.6, Baishuxia District, Chunlei, Xishan Economic Development Zone
  • Country/Region : China
  • Zip : 214101

high-power Crane conductor rail Current collector

high-power Crane conductor rail Current collector
Product Detailed
Applicable to high-power crane/Festoon System, Program 230, in C-Rail; Energy supply to crab

Outline of Current Collector

Current collector supply electric power to moving electric railcar, overhead traveler, tower crane, automatic conveyer line.    It should be possible to collect the current when the train is driven at high speed as well as when stopped, and the work of current collector should not be affected by the wind speed and noise while driving at high speed.

Especially while driving, required to be low. This can be classified as one for high-speed railway and one for light subway according to the characteristics and speed of the train.  


Crrent collectors  have very excellent lubricity and electrical conductivity, Also It does not harm other electrifying rail and have good wear resistance and strength.



Double Current collectors for transfer applications and higher amperage.


Electrical technical parameters

Max.current(A):  250 - 500 - 800 -1000




Flame retardant

Self extinguishing:class B 1-no flaming paricles,self-extinguishing.


Standard application data

Operating Conditions: for indoor and weather protected outdoor applications


Special features

High availability in strong industrial enviroment trough several material

High level of safety trough insulation profiles with integrated finger safe protection

Easy and exact mountig with multiple hangr clamps for (3, 4 and 5 pol)

Free and unlimited combination for multiple amount of rails

On side bending with optional bending device for curves possible


Main applications

EOT cranes

People Mover

Special purpose equipment



--After installation,Make sure that the sliding hangers are straight (in a perpendicular position) after nuts have been tightened to guarantee free sliding of the powerail.The powerail must be installed exactly straight and parallel to the machinery track.

--Before running the powerail,Check the system for esay running of the current collector trolleys,i.e.there may be no resistance by an excessively narrow slot or pull by the connecting cable.

--Every 3 up to max.12 months,-depending on the frequency of operation and travel distance-,check the carbon brushes and mechanical componets for wear and replace them if necessary

high-power Crane conductor rail Current collector

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.